Benutzer-Werkzeuge

Webseiten-Werkzeuge


ebus:serviceb512

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

ebus:serviceb512 [2015/10/14 19:50]
admin
ebus:serviceb512 [2015/10/14 19:59]
Zeile 1: Zeile 1:
-===== B5h 12h - Unknown Command ===== 
- 
-Date/Time: 
- 
-|  \\ **Master/ Slave Byte-No.**  \\  |  \\ **Abbrev.**  \\  |  \\ **Description** \\  |  \\ **Unit** \\  |  \\ **Range** \\  |  \\ **Type/ [Res.]**  \\  |  \\ **Repl. Value** \\  |  \\ **Note** \\  | 
-|  \\ M1 \\ |  \\ QQ \\ |  \\ Source address \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M2 \\ |  \\ ZZ \\ |  \\ Target address \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M3 \\ |  \\ PB = B5h \\ |  \\ Vaillant command \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M4 \\ |  \\ SB = 12h \\ |  \\ Unknown command [ping ?] \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M5 \\ |  \\ NN = 02h \\ |  \\ Length of data \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M6 \\ |  \\ xx \\ |  \\ ? \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M7 \\ |  \\ yy \\ |  \\ ? \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M8 \\ |  \\ CRC \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ S1 \\ |  \\ ACK \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ S2 \\ |  \\ NN = 00h \\ |  \\ Length of data \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ S3 \\ |  \\ CRC \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M9 \\ |  \\ ACK \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
-|  \\ M10 \\ |  \\ SYN \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ |  \\   \\ | 
- 
-The following cases were observed: 
- 
-  * 
- 
-Heater Controller (Master 10h) → Firing Automat 1 (Slave 08h): \\ <font inherit/inherit;;inherit;;transparent>(xx = 00h, yy = 00h) hot water circulating pump is  ** off **</font>  \\ <font inherit/inherit;;inherit;;transparent>(xx = 00h, yy = 64h) hot water circulating pump is  ** on **</font> 
- 
-  * 
- 
-Firing Automat 1 (Master 03h) → Pump 1 (Slave 64h): \\ <font inherit/inherit;;inherit;;transparent>(xx = 02h, yy = 00h) internal pump is</font> **off** \\ (xx = 02h, yy = 64h) internal pump is **on**  and operating in the **service water circuit** \\ (xx = 02h, yy = FEh) internal pump is **on**  and operating in the **heating circuit** \\ (xx = 03h, yy = 00h) internal pump is **disabled due to error condition**  (such as water pressure too low) 
- 
-  * 
- 
-Firing Automat 1 (Master 03h) → PC/ Modem (Slave 05h): \\ (xx = 03h, yy = 00h) 
- 
-\\ 
- 
  
ebus/serviceb512.txt · Zuletzt geändert: 2015/10/14 19:59 (Externe Bearbeitung)